Logistics parks
Warehouses near MIHAN read trucks at the yard gate so dock planning starts the moment a vehicle arrives.
UHF RFID in Nagpur
UHF RFID Reader in Nagpur
Nagpur sits at the geographic centre of India and is becoming a national logistics hub, led by MIHAN and the industrial estates of Butibori and Hingna. Trucks arrive around the clock. UHF RFID readers record every vehicle at the gate and open the barrier only for approved tags.
UHF RFID readers in Nagpur at a glance
TimeWatch supplies UHF RFID readers in Nagpur that read vehicle tags from 5 to 30 metres, so boom barriers open automatically for approved cars and trucks. The range runs from the TW-UR6 for single lane gates to the TW-UR710 for tolling, ports and logistics yards. Readers connect over Wiegand, RS232, RS485 or TCP/IP and are supported from TimeWatch's New Delhi headquarters.
- Read range
- 5 m to 30 m depending on model
- Fastest reader
- TW-UR710, approx 950 tags per second
- Frequency
- 865 to 867 MHz (India band)
- Tag standard
- EPC Class 1 Gen 2, ISO 18000-6C
- Outputs
- Wiegand, RS232, RS485, TCP/IP
- Coverage in Nagpur
- MIHAN, Butibori, Hingna, Kalmeshwar, Wardha Road, Civil Lines
- Supplier
- TimeWatch Infocom Pvt. Ltd., New Delhi
Where UHF RFID vehicle access is used in Nagpur
These are the parts of Nagpur with the most demand for long range RFID gates, and the traffic each one handles.
MIHAN
Multimodal cargo hub and SEZ
Butibori MIDC
Large industrial estate with textile, power and manufacturing units
Hingna MIDC
Engineering and auto component plants
Kalmeshwar
Manufacturing units on the western side
Wardha Road
Warehousing and logistics parks
Civil Lines and Sitabuldi
Government offices and commercial buildings
Typical UHF RFID deployments in Nagpur
Industrial estates
Butibori plants tag company vehicles and regular transporters.
Government offices
Secure campuses allow only registered vehicles inside.
Choose the right TimeWatch UHF reader for Nagpur
Pick the reader by gate width, traffic volume and how the data needs to reach your software.
| Model | Read range | RF power | Interfaces | Best for |
|---|---|---|---|---|
| TW-UR6 / UR6T | Up to 5 m | Up to 26 dBm | Wiegand, RS232 (RS485 optional, TCP/IP on UR6T) | IP65 outdoor reader for single lane gates, societies and door access |
| TW-UR6000 / 6000T | Up to 5 m | Up to 30 dBm | RS232, Wiegand (TCP/IP optional) | All in one reader for parking, short range gates and asset points |
| TW-UR12 / 12T | Up to 12 m | Up to 26 dBm | Wiegand, RS232 (RS485 optional) | IP68 reader for wider gates and campus entries |
| TW-UR8000 | Up to 16 m | Up to 33 dBm | RS232, Wiegand (TCP/IP optional) | Extended range for multi lane gates and factory truck entries |
| TW-UR710 | Up to 30 m | Up to 33 dBm | RS232, RS485, Wiegand, TCP/IP (Wi-Fi, BT, USB, 4G optional) | Longest range, approx 950 tags per second for tolling, ports and logistics yards |
TW-UR710: 30 metre long range UHF RFID reader
The TW-UR710 reads tags from up to 30 metres and captures approx 950 tags per second, with a built in circular polarized antenna and up to 33 dBm adjustable output. It connects over RS232, RS485, Wiegand and TCP/IP, with Wi-Fi, Bluetooth, USB and 4G as options, so it fits tolling lanes, port gates, logistics yards and busy parking entries.
How a UHF RFID gate works
- A passive UHF tag (windscreen sticker or hard tag) is fixed to each approved vehicle.
- The reader at the gate sends a UHF signal across its read zone.
- As the vehicle approaches, the tag returns its unique ID to the reader.
- The reader passes the ID to the access controller or software over Wiegand, RS232, RS485 or TCP/IP.
- Approved IDs open the boom barrier automatically, and every read is stored with date and time.
Readers can run alongside an ANPR camera for dual verification, and with boom barriers, bollards or flap gates for complete entry control.
Supply, installation and support in Nagpur
TimeWatch supplies UHF readers, windscreen and hard tags, boom barriers and access software for sites across MIHAN, Butibori, Hingna, Kalmeshwar, Wardha Road, Civil Lines and Sitabuldi. Our team helps with reader selection, mounting height and angle, tag placement and integration with your controller or software.
TimeWatch Infocom Pvt. Ltd., D-162, Okhla Industrial Area Phase I, New Delhi 110020. Sales: +91 95999 53923. Email: sales@timewatchindia.comUHF RFID reader in Nagpur: frequently asked questions
Does TimeWatch supply and install UHF RFID readers in Nagpur?
Yes. TimeWatch supplies UHF RFID readers, tags and complete vehicle access systems in Nagpur, covering MIHAN, Butibori, Hingna, Kalmeshwar, Wardha Road, Civil Lines and Sitabuldi. Installation and after sales support are coordinated from our New Delhi headquarters.
Which UHF reader is best for a factory or warehouse gate in Nagpur?
For a single lane gate up to 5 metres wide the TW-UR6 or TW-UR6000 is enough. For wider or multi lane truck gates choose the TW-UR8000, which reads up to 16 m. For yards, ports or toll style lanes choose the TW-UR710, which reads up to 30 m and approx 950 tags per second.
Which industrial areas in Nagpur use UHF RFID vehicle access?
Demand is strongest in MIHAN, Butibori MIDC, Hingna MIDC, Kalmeshwar, where sites need fast, logged entry for staff vehicles and trucks.
What is the read range of a UHF RFID reader?
TimeWatch readers cover up to 5 m (TW-UR6, TW-UR6000), 12 m (TW-UR12), 16 m (TW-UR8000) and 30 m (TW-UR710). Actual range depends on the tag, mounting position and site conditions.
What frequency do UHF RFID readers use in India?
UHF RFID in India uses the 865 to 867 MHz band. TimeWatch readers read EPC Class 1 Gen 2 (ISO 18000-6C) tags, and selected models also support 902 to 928 MHz for export projects.
Can a UHF reader connect to my existing boom barrier and access control?
Yes. The reader outputs the tag ID over Wiegand, RS232, RS485 or TCP/IP depending on the model, so it connects to standard access controllers, boom barrier controllers and parking or yard software.
What is the difference between UHF RFID and ANPR?
UHF RFID reads a tag fixed to the vehicle and works in rain, dust and low light. ANPR reads the number plate with a camera and needs no tag. Many sites use both together for dual verification.
How much does a UHF RFID system cost in Nagpur?
Cost depends on read range, number of lanes, tag type and whether you need barriers and software. Share your gate details and our team will send a quotation for your site.
Get a UHF RFID quote for your Nagpur site
Tell us the number of gates, lane width and vehicle volume. We will recommend the reader and tags and send a quotation.
