Port and CFS gates
Operators at Mundra and Kandla tag regular trailers so gate transactions are recorded without the driver stopping.
UHF RFID in Gujarat
UHF RFID Reader in Gujarat
Gujarat has two of India's largest ports at Mundra and Kandla, major refineries at Jamnagar, and dense industrial estates in Surat, Vadodara, Dahej, Ankleshwar and Vapi. Vehicle movement here is heavy and continuous. The TW-UR710 reads tagged trucks and tankers at up to 30 metres and around 950 tags per second, which suits port gates, refinery loading bays and high volume plant entries.
UHF RFID readers in Gujarat at a glance
TimeWatch supplies UHF RFID readers in Gujarat that read vehicle tags from 5 to 30 metres, so boom barriers open automatically for approved cars and trucks. The range runs from the TW-UR6 for single lane gates to the TW-UR710 for tolling, ports and logistics yards. Readers connect over Wiegand, RS232, RS485 or TCP/IP and are supported from TimeWatch's New Delhi headquarters.
- Read range
- 5 m to 30 m depending on model
- Fastest reader
- TW-UR710, approx 950 tags per second
- Frequency
- 865 to 867 MHz (India band)
- Tag standard
- EPC Class 1 Gen 2, ISO 18000-6C
- Outputs
- Wiegand, RS232, RS485, TCP/IP
- Coverage in Gujarat
- Ahmedabad, Surat, Hazira, Vadodara, Rajkot, Jamnagar
- Supplier
- TimeWatch Infocom Pvt. Ltd., New Delhi
Where UHF RFID vehicle access is used in Gujarat
These are the parts of Gujarat with the most demand for long range RFID gates, and the traffic each one handles.
Mundra and Kandla
Port gates, container yards and CFS operations
Jamnagar
Refinery and petrochemical complexes with tanker loading
Dahej and Ankleshwar
Chemical and petrochemical estates
Vapi
Chemical, paper and pharma units
Surat and Hazira
Textiles, diamonds, steel and port operations
Vadodara and Rajkot
Engineering, power equipment and auto component plants
Typical UHF RFID deployments in Gujarat
Tanker loading bays
Refinery and chemical sites allow only registered tankers into loading areas and log each visit.
Plant entries
Vadodara and Rajkot factories tag staff and supplier vehicles to replace manual registers.
Choose the right TimeWatch UHF reader for Gujarat
Pick the reader by gate width, traffic volume and how the data needs to reach your software.
| Model | Read range | RF power | Interfaces | Best for |
|---|---|---|---|---|
| TW-UR6 / UR6T | Up to 5 m | Up to 26 dBm | Wiegand, RS232 (RS485 optional, TCP/IP on UR6T) | IP65 outdoor reader for single lane gates, societies and door access |
| TW-UR6000 / 6000T | Up to 5 m | Up to 30 dBm | RS232, Wiegand (TCP/IP optional) | All in one reader for parking, short range gates and asset points |
| TW-UR12 / 12T | Up to 12 m | Up to 26 dBm | Wiegand, RS232 (RS485 optional) | IP68 reader for wider gates and campus entries |
| TW-UR8000 | Up to 16 m | Up to 33 dBm | RS232, Wiegand (TCP/IP optional) | Extended range for multi lane gates and factory truck entries |
| TW-UR710 | Up to 30 m | Up to 33 dBm | RS232, RS485, Wiegand, TCP/IP (Wi-Fi, BT, USB, 4G optional) | Longest range, approx 950 tags per second for tolling, ports and logistics yards |
TW-UR710: 30 metre long range UHF RFID reader
The TW-UR710 reads tags from up to 30 metres and captures approx 950 tags per second, with a built in circular polarized antenna and up to 33 dBm adjustable output. It connects over RS232, RS485, Wiegand and TCP/IP, with Wi-Fi, Bluetooth, USB and 4G as options, so it fits tolling lanes, port gates, logistics yards and busy parking entries.
How a UHF RFID gate works
- A passive UHF tag (windscreen sticker or hard tag) is fixed to each approved vehicle.
- The reader at the gate sends a UHF signal across its read zone.
- As the vehicle approaches, the tag returns its unique ID to the reader.
- The reader passes the ID to the access controller or software over Wiegand, RS232, RS485 or TCP/IP.
- Approved IDs open the boom barrier automatically, and every read is stored with date and time.
Readers can run alongside an ANPR camera for dual verification, and with boom barriers, bollards or flap gates for complete entry control.
Supply, installation and support in Gujarat
TimeWatch supplies UHF readers, windscreen and hard tags, boom barriers and access software for sites across Ahmedabad, Surat, Hazira, Vadodara, Rajkot, Jamnagar, Mundra, Kandla, Gandhidham, Dahej, Bharuch, Ankleshwar and Vapi. Our team helps with reader selection, mounting height and angle, tag placement and integration with your controller or software.
TimeWatch Infocom Pvt. Ltd., D-162, Okhla Industrial Area Phase I, New Delhi 110020. Sales: +91 95999 53923. Email: sales@timewatchindia.comUHF RFID reader in Gujarat: frequently asked questions
Does TimeWatch supply and install UHF RFID readers in Gujarat?
Yes. TimeWatch supplies UHF RFID readers, tags and complete vehicle access systems in Gujarat, covering Ahmedabad, Surat, Hazira, Vadodara, Rajkot, Jamnagar, Mundra, Kandla, Gandhidham, Dahej, Bharuch, Ankleshwar and Vapi. Installation and after sales support are coordinated from our New Delhi headquarters.
Which UHF reader is best for a factory or warehouse gate in Gujarat?
For a single lane gate up to 5 metres wide the TW-UR6 or TW-UR6000 is enough. For wider or multi lane truck gates choose the TW-UR8000, which reads up to 16 m. For yards, ports or toll style lanes choose the TW-UR710, which reads up to 30 m and approx 950 tags per second.
Which industrial areas in Gujarat use UHF RFID vehicle access?
Demand is strongest in Mundra and Kandla, Jamnagar, Dahej and Ankleshwar, Vapi, where sites need fast, logged entry for staff vehicles and trucks.
What is the read range of a UHF RFID reader?
TimeWatch readers cover up to 5 m (TW-UR6, TW-UR6000), 12 m (TW-UR12), 16 m (TW-UR8000) and 30 m (TW-UR710). Actual range depends on the tag, mounting position and site conditions.
What frequency do UHF RFID readers use in India?
UHF RFID in India uses the 865 to 867 MHz band. TimeWatch readers read EPC Class 1 Gen 2 (ISO 18000-6C) tags, and selected models also support 902 to 928 MHz for export projects.
Can a UHF reader connect to my existing boom barrier and access control?
Yes. The reader outputs the tag ID over Wiegand, RS232, RS485 or TCP/IP depending on the model, so it connects to standard access controllers, boom barrier controllers and parking or yard software.
What is the difference between UHF RFID and ANPR?
UHF RFID reads a tag fixed to the vehicle and works in rain, dust and low light. ANPR reads the number plate with a camera and needs no tag. Many sites use both together for dual verification.
How much does a UHF RFID system cost in Gujarat?
Cost depends on read range, number of lanes, tag type and whether you need barriers and software. Share your gate details and our team will send a quotation for your site.
Get a UHF RFID quote for your Gujarat site
Tell us the number of gates, lane width and vehicle volume. We will recommend the reader and tags and send a quotation.
